Hustler Turf Lawn Mower Lawn Mowe User Manual

Huster Turf Equipment  
Mini Z& Super Mini Z™  
Mini Z /Super Mini Z Specifications  
ENGINE SPECIFICATIONS  
Model  
Kawasaki  
Kawasaki  
Kawasaki  
Honda  
Kohler  
Horsepower  
No. of Cylinders  
Displacement  
Compression Ratio  
Max. Torque  
19  
23  
25  
24  
20  
2
2
2
2
2
41.2 cu in (675 cc)  
8.1:1  
41.2 cu in (675 cc)  
8.1:1  
41.2 cu in (675 cc)  
8.1:1  
40.9 cu in (670 cc)  
8.3:1  
38.0 cu in (660 cc)  
8.5:1  
37.0 ft lbs @ 2400 rpm  
39.8 ft lbs @ 2400 rpm  
41.0 ft lbs @ 2400 rpm  
37.5 ft lbs @ 2500 rpm  
36.2 ft lbs @ 2600 rpm  
Starter 12-volt (.8 kw), solenoid shift positive engagement  
Ignition Electronic  
Counter-rotating, independent drive wheels  
.187 in x .375 in (.47 cm x .95 cm) box-section reinforced front edge.  
Steel deck housing is 4 in (10.16 cm) deep to provide room for high-  
capacity mowing.  
BRAKES:  
Service:  
Parking:  
Hydrostatic dynamic braking  
Charging System 12-volt, 15-amp  
Automotive-style drum brakes. When steering levers  
are placed in neutral position, integral park brakes are  
automatically engaged  
Deck Lift Raise and lower deck from driver’s seat with simple foot-  
operated deck height adjustment. Pin for setting height, transport  
position. Change cutting heights, hop curbs and trailer more easily.  
Fuel Unleaded gasoline with octane rating of 87 or higher  
Fuel Filter Replaceable, automotive-type  
Mower Drive Single V-belt drive from engine with electric clutch.  
Spring tension idler for extended belt life.  
Cutting Heights Foot-operated deck height adjustment. Pin for set-  
ting height, detent for transport position. Height adjustment in .25 in  
increments from 1 in to 4.5 in (2.55 cm to 11.43 cm).  
Air Filter Heavy-duty air cleaner to extend the service interval for  
excessive, dirty applications and improved performance  
TIRES:  
Cooling Air cooled. Fly-wheel fan  
Governor Mechanical  
Front: 13 x 5.00 – 6, rib tread  
Drive: 23 x 9.50 – 12, turf tread  
Mowing Blades Heavy-duty, heat-treated, high-lift steel blade  
44 in: 16 in x 2.5 in x .20 in  
52 in: 18 in x 2.5 in x .20 in  
CAPACITIES:  
Fuel System: 12 US gal (45.4 l)  
Hydraulic Oil: 2 US gal (7.57 l)  
TRACTION DRIVE SYSTEM  
Blade Tip Speed  
44 in: 16,100 fpm  
52 in: 18,300 fpm  
Type Dual hydrostatic. Individual pumps power two direct-drive  
wheel motors. Hydrostatic system operates on 10W40 motor oil.  
Transmission drive (oil) cooler for increased system life.  
DIMENSIONS:  
Height:  
40 in (101.6 cm)  
Blade Drive V-belt drive to all three spindles. Spring tension idler  
Pumps Two variable displacement, axial-piston type. Each pump  
powers one drive-wheel motor. Mini Z: Hydro-Gear BDP10 Super  
Mini Z: Hydro-Gear BDP16  
pulleys.  
W/44 in Deck Length:  
Overall width:  
Tire-to-tire width:  
Weight:  
72 in (182.88 cm)  
45 in (114.3 cm) with disc. chute up  
44 in (111.76 cm)  
Spindles Machine aluminum housing, 1 in (2.5 cm) diameter high  
carbon steel shafts and sealed ball bearings.  
985 lbs (446.79 kg)  
Pump Drive V-belt drive from engine crankshaft  
Flotation Suspended mower floats on four spring-assisted chains. 6  
anti-scalp wheels are standard.  
W/52 in Deck Length:  
Overall width:  
Tire-to-tire width:  
Weight:  
75 in (190.5 cm)  
53 in (134.6 cm) with disc. chute up  
44 in (111.76 cm)  
Hydraulic Lines Stainless-steel, high-pressure lines with Parker  
Seal-Lok™ O-Ring Face-Seal fittings. Hydraulic lines and fittings  
guaranteed to never leak!  
Width of Cut  
44 in: 44 in (111.76 cm)  
52 in: 52 in (132.08 cm)  
985 lbs (446.79 kg)  
Final Drive Direct-drive high-torque wheel motors. One for each  
drive wheel. White CE 12  
Trim Capacity (left side)  
44 in: .5 in (1.27 cm)  
52 in: 6 in (15.24 cm)  
Safety Features Operator presence system connected to deck and  
drive clutches. Stabilizer rollers at rear of tractor  
Filter 40 micron, spin-on type  
Ground Speed Infinitely variable  
Seat  
Mini Z: 0-9 mph (0-14.48 kph) forward, 0-7 mph (0-11.27 kph)  
reverse. Super Mini Z: Forward 0-13 mph (0-20.92 kph) forward,  
0-7 mph (0-11.27 kph) reverse  
Standard: Molded-vinyl seat with armrests. Fore and aft adjustment  
ACCESSORIES  
Construction: Mainframe is 1.5 in x 2 in x .125 in (3.8 cm x 5.08  
cm x .32 cm) rectangular steel tubing. Drive motors mounted to .179  
in (.45 cm) welded steel. Front caster wheels mounted with roller  
bearings on each wheel. Front caster forks are .375 in (.95 cm) steel  
BAC-VAC™ Catcher Rear-mounted, 9-bushel hopper is dumped  
from the seat without leaving the machine. Blower is powered from  
right-side deck spindle (no pony engine required). Hopper and blower  
can be added or removed in seconds.  
Steering Twin-lever SmoothTrak™ steering provides independent  
control of each drive wheel. Speed, forward, reverse, brake, and turns  
are all controlled with hand-operated controls  
Deck Lift: Foot-operated deck height adjustment. Pin for setting  
height, detent for transport position  
Rear-Mount, 2-Bag Catcher 6-bushel capacity. Hand-dump wher-  
ever you like or line with trash bags for easier handling. Blower is  
powered from right-side deck spindle (no pony engine required).  
Controls: Hand-operated choke/throttle, ignition switch, electric  
mower clutch. Integrated parking brakes  
Mulch Kit Recycles clippings under deck allowing clippings to be cut  
and recut, then discharged down into the grass. Reduces handling  
of clippings, improves appearance, and recycles nutrients back to  
the soil.  
Indicators: Hour meter, engine warning light  
Cup Holder: Two cup holders molded into the left side fuel tank.  
Accommodates nearly any cup size including Big Gulp™  
Hitch Kit Optional bolt-on hitch with 7/8-inch hole. Will accept any  
standard ball.  
MOWING DECKS  
Flex Forks Flex Forkssmooth out the ride producing a more even  
cut especially over uneven terrain. A smoother ride allows for greater  
operator comfort at higher speeds. Mow faster, get done sooner.  
44”, and 52” side-discharge decks  
Type Free-floating mower using three blades with center blade to  
the front. Mower is suspended at the corners. Includes deck-mounted  
rollers to improve flotation in rolling and uneven terrain.  
Light Kits An aftermarket kit that mounts easily to the fuel tanks.  
The light kit will allow you to start earlier and finish later. Available  
for the FasTrak, Hustler Mini Zand Hustler Z™  
.
Construction 11-gauge deck plate with an 7-guage deck plate  
doubler with.125 in (.317 cm) welded steel. Solid 1 in x .375 in  
(2.55 cm x .95 cm) steel bars reinforce impact areas on trim edges.  
Specifications subject to change without notice.  
F o r m o r e i n f o r m a t i o n : w w w . h u s t l e r t u r f . c o m  
Hustler Turf Equipment • Hesston, Kansas 67062 • 1-800-395-4757  
Form No. 787416 4-06  
 

Graco Webcam 24H253 User Manual
Greenheck Fan Ventilation Hood OFSD 211 User Manual
Grizzly Drill G0642 User Manual
Harbor Freight Tools Cordless Saw 04095 User Manual
Harbor Freight Tools Patio Furniture 9018 User Manual
Harman Kardon Stereo Receiver AVR 255 230V User Manual
Hotpoint Microwave Oven SBS51XS User Manual
HP Hewlett Packard Weather Radio 4262A User Manual
Husqvarna Chainsaw 1100 CD User Manual
Hustler Turf Lawn Mower Super ZT User Manual